How to Put Adam Weighing Indicators on a Stand

Included with the indicator stand:

Included with the indicator:

Step 1

Unbox the indicator and all the parts.

Make sure all the small pieces are accounted for.

Grab a flathead screwdriver (not included).

Step 2

Take the mounting bracket of the indicator.

Step 3

Take the metal collar. You want to fix the collar to the bracket

Step 4

Align the metal collar with the holes at the center of the indicator’s metal mounting bracket. The metal collar should be under the bracket like so.

The metal collar has a hole to the side, which should align to the back of the indicator. The hole should also be closer to the metal bracket.

Step 5

Align the washer pieces with the holes. Place the screws in each of the holes, and tighten by hand to make sure they don’t fall out.

Step 6

Using the Allen key, tighten the screws to make sure the ring is well fixed.

Step 7

After the ring is screwed to the indicator, align the holes on the side of the indicator and the side of the metal bracket.

There are 2 screw holes on the side of the indicator. The screw should be inserted into the hole in the middle of the side of the indicator.

Step 8

Screw the indicator to the metal bracket with a screwdriver.

Step 9

Take the black knob, and tighten to the hole above by hand.

Step 10

Repeat this procedure on the other side.

Step 11

Take the metal adaptive collar.

Step 12

Push it in the indicator’s metal collar.

Step 13

Once it’s firmly attached, you can slide the indicator on the stand. Slide the metal adaptive collar in the black tube.

Step 14

You’re almost done! On the back of the metal collar, there is a hole. Place a bolt in the hole, and tighten it. This will attach the indicator to the stand.